Self Supporting Tower

Self-supporting towers are supported on ground or on building and they act as cantilever trusses in carrying the wind and seismic loads. Though the weight of these towers is more they require less base area and are suitable in many situations. Most of the TV, MW, Power transmission, and flood light towers are self-supporting towers Ground Based Tower (GBT): Square Angular, Triangle Angular and Triangle Tubular Roof Top Tower (RTT): Square Angular, Triangle Angular and Triangle Tubular Aviation Lamps

Steel towers can be constructed in number of ways but most efficient use of material is achieved by using open steel lattice. The typical arrangement for microwave tower is shown in the figure. The use of an open lattice avoids presenting the full width of structure to the wind but enables the construction of extremely light in weight and stiff structures. Hence most of the Telecom Cell structures are lattice structures.

All types of Electrical works & Transmission Towers

Angular Towers & Tubular Tower

• Supply and Installation of   Four Legged Angular Towers ranging from 9Mtrs to 40 Mtrs Height.
• Electricity Tower
• Supply and Installation of   Four Legged Angular Towers ranging from 9Mtrs to 40 Mtrs Height.
• Mast Tower
• Supply and Installation of   Four Legged Angular Towers ranging from 9Mtrs to 30 Mtrs Height

Guyed Masts

Guyed Masts provides height at a much lower material cost than self-supporting towers due to the efficient use of high strength steel in the guys. Guyed masts are normally guyed in three directions over an anchor radius of typically 2/3 of the tower height and have a triangular lattice section for the central mast. Tubular masts are also used, especially where icing is very heavy and lattice sections would ice up fully.

Mono Poles & High Masts

In the process of expanding our arms with the changing needs of the industry we are now in to the production of Mono Poles and high masts with the pure intention of providing complete solution to today's requirements for communication, lighting and power transmission. Aster has introduced tapered polygonal poles.

• Mono Poles with Steps and Cages with Ladders (Dia 90MM, 114MM, 224MM)
• 3 Mtrs Height
• 4 Mtrs Height
• 5 Mtrs Height
• 6 Mtrs Height
• 8 Mtrs Height
• 9 Mtrs Height
• 12 Mtrs Height

Antenna Mounts

we are doing GSM & MW Mount, Doul Mounts, Paralal   Mounts and all type of Antina Mounts

Cable Trays

• Perforated Cable Trays (width Ranging from 150MM-800 MM)
• Light Duty Perforated Cable Trays (Thickness .8 MM to 1 MM)
• Medium Duty Perforated Cable Trays (Thickness 1.2 MM to 2.5 MM)
• Heavy Duty Perforated Cable Trays (Thickness .3 MM to 4 MM)
• Ladder Type Cable Tray (width Ranging from 150MM-800 MM)
• Made from Sheet metal (Thickness   1 MM  to  4 MM)
• Made from Angle and flats (3 MM  -  6MM)
• Soild Bottom Type (width Ranging from 150MM-800 MM)
• Sheet metal (Thickness   0.8 MM  to  3 MM)
• Cage Cable Tray (width Ranging from 150MM-800 MM)

Tower Accessories

• Earthing Strips, Earthing Plates, Earthing Electrodes, Earthing Pipes, wiremesh & Funnels
• Supply, fabrication and installation of main gate
• Telecom Tower upgradation work

Industrial/Commercial/Godown Sheds

• PTFL undertakes total turnkey of constructing Industrial/Commercial/Godown sheds upto 156x60x25 Mtrs(LxBxH).
• PTFL undertakes from site survey,cleaning,earthwork,civil,complete structure,sheeting galvanized and galvalium sheets,painting and electrical works.

Solar lights & Pumps

• PTFL supplies solar street lights from 6 Mtrs to 21 Mtrs height.
• PTFL supplies and installs solar structure for agricultural pumps.